Roll-Fed Thermoforming Machine
New TTF-700AF four-station thermoforming machine presented by LITAI for PET coffee cup lids. The supplier lists a maximum forming area of 700 × 550 mm and maximum forming height of 120 mm. This listing covers the machine model, with the photo illustrating the published configuration. Lid tooling, sheet specification, final station setup and delivery should be confirmed with LITAI.
New TX-620B plastic sheet vacuum forming machine in LITAI’s TX-620 range. Its published forming size is 420–620 mm wide by 760–1220 mm long, with rated power of 32 kW. LITAI presents the family for formed plastic packaging and trays. The photo is shared across the model family and does not promise the exact TX-620B build; verify tooling, controls and output with the supplier.
New TX-620A plastic sheet vacuum forming machine from the LITAI TX-620 family. The supplier lists a forming size of 420–620 mm in width by 460–860 mm in length and rated power of 24 kW. The family is presented for packaging products made from PVC, PE, PET, PP, PS and HIPS sheet. The shared family image is illustrative; confirm model-specific construction and tooling with LITAI.
New TQC-650B plastic cup thermoforming machine, shown by LITAI for ice cream cup applications. Published model information gives a maximum mould size of 650 × 300 mm and a maximum sheet width of 660 mm. Forming depth depends on configuration. Cup tooling, sheet grade, cycle rate for the finished product and delivery terms should be confirmed with the manufacturer.
New TTF-520A three-station plastic thermoforming machine. LITAI specifies a maximum forming area of 520 × 400 mm, maximum forming height of 110 mm and sheet thickness range of 0.2–2 mm. The machine is listed for forming packaging from plastic sheet. Confirm tooling, material compatibility, installed options and achievable output for the intended product with the supplier.